|
原装进口瑞典伊萨OK Autrod 5183铝镁焊丝ER5183铝镁气保焊丝
名称:OK Autrod 5183铝镁焊丝 标准:GB/T10858 SAI5183 AWS A5.1 ER5183 成分:Mg=4.3-5.2%;Mn=0.5-1.0%;Cr=0.05-0.25;Ti≤0.15%;Al余量。 说明:OK Autrod 5183是含镁近5%及较高锰含量的铝镁焊丝,具有良好的耐蚀性、抗热裂性,强度高可锻性好。焊缝阳极化处理后仍为白色,能为焊接接头提供良好的配色,对于某些合金来讲,焊接接头强度略高于ER5356。 用途:用作铝镁合金氩弧焊的填充金属,在机车车厢、化工压力容器、核工业、造船、制冷、锅炉及航空航天工业上获得应用。 瑞典伊萨OK Autrod 5183铝合金焊丝 ER5183铝镁焊丝 OK Autrod 5183GMAW
OK Autrod 5183 is designed to provide the highest possible strength in the as-welded condition of alloy AA 5083 and similar high-magnesium alloys. The more common OK Autrod 5356 typically fails to meet the as-welded tensile requirements of AA 5083. The alloy is typically used in marine and structural applications where high strength, high fracture toughness for impact resistance and exposure to corrosive elements are important. The alloy is not recommended for elevated temperature applications due to its susceptibility to stress corrosion cracking. The alloy is non-heat treatable. Welding current DC( ) Classifications | Approvals | Typical all weld metal composition, % | Typical mech. properties all weld metal | SFA/AWS A5.10 | ER5183 | EN ISO 18273 | S Al 5183 (AlMg4,5Mn0,7(A)) | JIS Z 3232 | A5183 |
| ABS | ER5183 (For lots starting with RB) | BV | WC | CE | EN 13479 | ClassNK | KAl5RCG(I-1)(I-4) (For lots starting wi | CWB | AWS A5.10 | DB | 61.039.03 | DNV | 5183 | GL | RAlMg4.5mN | LR | WC/I-1 | VdT?V | 04666 |
| Si | 0,40 | Mn | 0,8 | Cr | 0,15 | Cu | <0,10 | Ti | <0,15 | Zn | <0,25 | Fe | <0,40 | Mg | 4,8 | Wire composition |
| Yield stress, MPa 125 Tensile strength, MPa 275 Elongation, % 17 Elongation, % 17 |
Diameter, mm | 0.8 | 1,0 | 1,2 | 1,6 | 2,4 | Arc voltage, V | 13-24 | 15-26 | 20-29 | 25-30 | 26-31 | Welding current, A | 60-170 | 90-210 | 140-260 | 190-350 | 280-400 |
品牌:瑞典伊萨ESAB
|